New Products

UC-Draw Ver.7 Applys specifications For Highway Bridges, 2012. 2D general CAD for civil engineering Price● （New）US$1,580　（Version Up）US$110 Release● Jun, 2012 UC-1 CALS/CAD

Introduction

UC-Draw is 2D general-purpose CAD that enables a flexible, efficient drawing creation which has abundant drawings, edits, and the viewing commands and also installs the generation function etc. of the bar arrangement drawing, the processing chart, and the reinforcement table as CAD for engineering works. This time, specifications for highway bridges (March, 2012) are released to the public. "Addition of the reinforced concrete material" and "Bent radius of the reinforced steel" are revised. UC-Draw Ver.7 ( Ver.7.1.0 ) in which "Supports revised specifications for highway bridges of generation function of the processing chart and the reinforced steel table" and "Enhance of the drawing function" is performed in UC-Draw will be released.

Supports specifications for highway bridge in 2012

In specifications for highway bridges (March, 2012), Reinforced steel material "SD390,SD490" has been added and "Bend internal radius of the reinforced steel" has been revised as follows. Sign Hook Stirrup and tie hoop SR235 2Φ 1Φ SD295 2.5Φ 2Φ SD345 2.5Φ 2Φ Sing Hook Other than hook Delete round steel ( SR235 ) and delete the classification of stirrup / tie hoop SD345 2.5Φ 2.0Φ SD390 3.0Φ 2.5Φ Add SD490 3.5Φ 3.0Φ The function of setting for standard value of "SD390,SD490" is prepared for "Generation reinforced steel function of the processing chart and the table" in UC-Draw and it supports the processing chart drawing and the calculation of the length of the reinforced steel of the regulated bend radius. ■Figure 1　Screen of processing drawing condition

Drawing function has been enhanced.

The following drawing functions have been enhanced. Bar arrangement function Supports the edit function (add and delete reinforced line) of several straight leader lines drawn from the several reinforced bars drawn in bar arrangement drawing. ■Figure 2　 Example of edit reinforced leader line Generation function for processing chart and reinforced steel table The angle dimension drawn on the processing chart can be selected from "degree (°) " and "degree, minute and second (°'")". ■Figure 3　Enhancing of angle dimension signage Drawing function Generation function for road standard crossing chart is supported. Input function Memory capacity when importing DXF,DWG can be deleted and drawing of large capacity can be imported.  Output function Supports output function into TIFF file. ■Figure 4　Output expansion（output Tiff file）

Finally

We will take the opinion and demand from customers and try to our best to improve UC-Draw so that it could be a helpful product for your business.

(Up&Coming '12　Summer Issue)

Up&Coming